Our gas tank prep kit from Kreem products is a three part combo pack and will help stop leaks and prevent corrosion.

VT No: 41-0113
Our gas tank prep kit from Kreem products is a three part combo pack and will help stop leaks and prevent corrosion.
Kit includes one 16 ounce bottle of tank wash/cleaner, one 8 ounce bottle of tank prep and one 16 ounce bottle of tank liner. Kreem will seal and protect, prevent rust. and stop leaks from pinholes and hairline cracks on new gas tanks. It is resistant to alcohol and gasohol and will withstand most octane boosters. Most gas tanks will require one pint of Kreem per three gallon capacity. Recommended for all new tanks to prevent rusting.
Fits:
All models
UOM: 1 - KIT
Country of Origin: USA

2018 Catalog pages: 1271

2017 Catalog Page: 1271

V-Twin Manufacturing Part Number: 41-0113
Manufacturer:
Manufacturer Part Number: 1210 *25 CASES*

Harley-Davidson & Indian OEM Cross Reference Part Numbers:            

Tech Notes:
You can remove Kreem by using Acetone or Methyl ethyl keytone, available at most paint stores. Fill about half full, seal the tank and leave for about 24 hours, drain and inspect.
Sealing over old Kreem Liner, inspect the tank, if no peeling wash tank out with degreaser, rinse tank for 2 minutes using 1 pint of acetone. Re-coat tank with Kreem Liner.
Sealing over old Kreem Liner, if tank is peeling wash with a degreaser, rinse tank for 2 minutes using 1 pint of acetone, re-apply after using Tank Prep A and B part #41-0112.
To thin Kreem tank liner use methyl ethyl keytone or acetone