Four bolt WR intake manifold for Linkert carburetor is cast iron with zinc plating.

VT No: 35-0286
OEM No: 27020-40
Four bolt WR intake manifold for Linkert carburetor is cast iron with zinc plating.
NOTE: For WR and K use, order correct manifold nuts and seals separately. Installation requires the nipples to be screwed into the cylinder depth so that the manifold alignment is correct. For the float arm installation, the center prong of the float arm should have .003" of clearance, in order for the arm and needle to move freely.
Fits:
K 1952-1956
WR 1941-1952
KH 1954-1956
UOM: 1 - EA
Country of Origin: Imported

2018 Catalog pages: 809
Measurements 

2017 Catalog Page: 811

V-Twin Manufacturing Part Number: 35-0286
Manufacturer:
Manufacturer Part Number:

Harley-Davidson & Indian OEM Cross Reference Part Numbers: 27020-40           

Tech Notes:
To install the WR manifold on a 45" cylinder, on W and G models, the intake manifold nipples must be replaced with #9423-1 larger nipples.
Suggested to use with #35-1707 Manifold Nipple Set
To be installed on WL models 0.100" must be machined from eash spigot for a total of 0.200" overall.
Suggested to use with #35-1952 Intake Manifold Nut Set.

Replacement Items:
9664-8 - Parkerized Linkert Carburetor Mount Screws
7104-2 - Brass Intake Manifold Seals