18 inch Spring Fork Assembly Black

Stock length kit includes front and rear black powder coated legs parkerized outer springs and zinc plated rocker studs. It comes completely assembled with a 1 inch stem with 1 inch x 24 thread.

Order bearing neck kit axle kit top tree black rockers and handlebars separately. Some assembly may be required. Bottom of neck is larger in diameter to accommodate the lower race. Rear fork leg is not tapped use standard tap *NOTE: Does not have the casting marks. *NOTE: Length measured from bottom of lower race to center of axle on rocerks. See diagram. Front leg does not have provision to add ride control or shock assembly. This complete replica Spring Fork assembly is a product of 14 separate processes: Tubing Hydraulic Swage Press Investment Casting Forging Flattening Press Robotic Welding Brazing Polish Chrome Paint Spring Winder Machine Shop Drill Shop and Packaging.

Measurements:

Length: 18 inches
Axle Size: 3/4 inches
Between Rockers: 8 inches

Tech Notes:

*NOTE: Must order shock ride control axle assembly top tree black rocker set and bearing kit as required.
How we measure Spring Forks. NOTE: Measurement is from the triple tree where stem and lower bearing sits to the axle position. This is the effective length as it is the legnth
from the lower bearing cup on the frame to axle. Installer can slide a pipe or solid bar thru the bearing cups and measure the length that may be needed for the desired frame
height. This Spring Fork assembly accepts a 3/4inch axle for custom applications. As rockers are not offset (as on replica Spring Forks). 1inch stem utilized tapered bearings for
ease of installation.
Suggested to use with #24-0150 Stem Cone Nut Black.
Suggested to use with #49-2582 Rocker Set Black for offset rockers.
Suggested to use with #49-0335 Fork Rocker Set Black for inside rockers.

Basic Generalized Stock Fitment Chart:

1941 - 1945 FL
1937 - 1945 UL
1936 - 1940 EL

Unit Of Measure: KIT

Manufacturer Details:

OEM Cross Reference Part Numbers: