V-Twin Factory Sample Replica Rear Fender with Hinged Tail
Manufacturer - Distributor - OEM Numbers
V-Twin Manufacturing Part Number: 50-2239
V-Twin Part Number:
OEM Numbers: 59604-69C
Factory Sample replica rear fender with hinged tail and tail lamp cutout. Accepts late 1973-up large style tail lamp. Fender has turn signal bar indent and holes.
Fender is for use with a 16" or 19" whee. Please mount to struts before painting or finishing. Check mount hole locations for struts. Holes may have to be enlarged for certain strut hole locations. Before priming or painting, fit the fender body, braces and mounting points in place. Fender rivets, hinge and brackets will have to be tweaked for final fitment. Patience is required for proper installation! The tail lamp mounting holes are 2-1/2" apart. The holes with indents are 6" apart, sitting 1" below the mounting holes and 1-3/4" outside of tail lamp holes. Factory sample is a brand new pre-production parts but may have imperfections on the finished surface. Check threaded and bearing holes for excess plating before installation. There are no physical defects, such as cracks or holes, there will be cosmetic imperfections only. *Note: UPS may consider this part as packaged "oversize" for shipment, as compared to the actual weight, which will result in higher shipping costs.
Fender is for use with a 16" or 19" whee. Please mount to struts before painting or finishing. Check mount hole locations for struts. Holes may have to be enlarged for certain strut hole locations. Before priming or painting, fit the fender body, braces and mounting points in place. Fender rivets, hinge and brackets will have to be tweaked for final fitment. Patience is required for proper installation! The tail lamp mounting holes are 2-1/2" apart. The holes with indents are 6" apart, sitting 1" below the mounting holes and 1-3/4" outside of tail lamp holes. Factory sample is a brand new pre-production parts but may have imperfections on the finished surface. Check threaded and bearing holes for excess plating before installation. There are no physical defects, such as cracks or holes, there will be cosmetic imperfections only. *Note: UPS may consider this part as packaged "oversize" for shipment, as compared to the actual weight, which will result in higher shipping costs.
FL 1973-1984 |
FITMENT DISCLOSURE:
This quick reference fitment information is provided to direct you to our catalog information
and the manufacturer's information. Consult manufacturer publication(s) and/or website(s) for
specific fitment and application information and other important information. This fitment
information is based upon the stock version of the motorcycle or unit referenced and any
accessory added or other modification could invalidate the quick reference information provided.
| OEM No. | 59604-69C | |
|---|---|---|
| UOM | 1 - EA | |
| Measurements |
| |
| Manufacturer | V-Twin | |
| Origin | Imported | |
| Style | Stock |
V-Twin 59604-69C Factory Sample Replica Rear Fender with Hinged Tail - 50-2239
- Brand: V-Twin
- Product Code: 50-2239
- Availability: In Stock
-
$178.49
Tags: Classic Pre-1984, Fender, Rear, Fenders