V-Twin Factory Sample Replica Rigid Fender
Manufacturer - Distributor - OEM Numbers
V-Twin Manufacturing Part Number: 50-2240
V-Twin Part Number:
OEM Numbers: 59604-49
Factory sample replica rigid rear fender has 1949-1950 style chain relief cutout. Fender is fully assembled and riveted together with hinge.
Before finishing with primer or paint installer must prepare fender by checking alignment of fender tail and bracket, fit the fender body, braces and mounting points in place and must be hand fitted at hinge and pin area. Fender rivets, hinge and brackets and alignment will have to be adjusted and tweaked to fit your components. Fender tail is not drilled or "cut out" for tail lampinstallation. Patience is required for proper installation! We suggest pre-fitting fender prior to painting. *NOTE:Chain panel with ribs is "built in" as one piece with the fender. Factory sample is a brand new pre-production parts but may have imperfections on the finished surface. Check threaded and bearing holes for excess plating before installation. There are no physical defects, such as cracks or holes, there will be cosmetic imperfections only. *NOTE: UPS may consider this part as packaged "oversize" for shipment, as compared to the actual weight, which will result in higher shipping costs.
Before finishing with primer or paint installer must prepare fender by checking alignment of fender tail and bracket, fit the fender body, braces and mounting points in place and must be hand fitted at hinge and pin area. Fender rivets, hinge and brackets and alignment will have to be adjusted and tweaked to fit your components. Fender tail is not drilled or "cut out" for tail lampinstallation. Patience is required for proper installation! We suggest pre-fitting fender prior to painting. *NOTE:Chain panel with ribs is "built in" as one piece with the fender. Factory sample is a brand new pre-production parts but may have imperfections on the finished surface. Check threaded and bearing holes for excess plating before installation. There are no physical defects, such as cracks or holes, there will be cosmetic imperfections only. *NOTE: UPS may consider this part as packaged "oversize" for shipment, as compared to the actual weight, which will result in higher shipping costs.
FL 1949-1954 EL 1949-1954 |
FITMENT DISCLOSURE:
This quick reference fitment information is provided to direct you to our catalog information
and the manufacturer's information. Consult manufacturer publication(s) and/or website(s) for
specific fitment and application information and other important information. This fitment
information is based upon the stock version of the motorcycle or unit referenced and any
accessory added or other modification could invalidate the quick reference information provided.
| OEM No. | 59604-49 | ||
|---|---|---|---|
| UOM | 1 - EA | ||
| Measurements |
| ||
| Manufacturer | V-Twin | ||
| Origin | Imported | ||
| Style | Stock | ||
| Tech Note | *NOTE: We have an updated rear hinge available to replace existing hinge. Must be riveted in place, #50-1243 Replica Rigid Rear Fender Hinge. |
V-Twin 59604-49 Factory Sample Replica Rigid Fender - 50-2240
- Brand: V-Twin
- Product Code: 50-2240
- Availability: Out Of Stock
-
$178.49
Tags: Classic Pre-1984, Fender, Rear, Fenders