Panhead Cam Cover Chrome

Panhead cam cover features a chrome finish and has a Hubbard welch plug installed as original.

This cover is exact for 1952 Panheads. Cam cover does not include OHO oil feed hole. *NOTE: This is the Alcoa version. Cam cover bushings must be checked and fitted (reamed) for final assembly. Check end play as well. Make sure oil passages and oil feed holes in bushings are clear. Tapered screw holes may require a deeper counter sink check with screw head before installation. May require some modification for proper fitment. *NOTE: Check oil passage (drilled hole) into bronze bushings either on existing bushings or when replacing bushings. Generator holes for 32E 6 volt 2 brush generators are 1/4 inch on Pre-1957 models and 5/16 inch on 1958-1969 models.

Basic Generalized Stock Fitment Chart:

1948 - 1953 EL
1948 - 1953 FL

Unit Of Measure: EA

Manufacturer Details:

Manufacturer: V-Twin
Part #:
Country of Origin: TAIWAN
V-Twin Manufacturing Part #: 10-1631

OEM Cross Reference Part Numbers: