V-Twin 8-Finned Knucklehead Cam Cover Chrome
Manufacturer - Distributor - OEM Numbers
V-Twin Manufacturing Part Number: 10-1748
V-Twin Part Number:
OEM Numbers:
Forged aluminum 1940 Knucklehead 8-finned cam cover features a chrome finish and includes the "welch" plug installed, as original, in the top and rear. Cam cover also includes OHO oil feed hole.
*NOTE: Accepts 1/4" generator screws. Cam cover bushings must be checked and fitted (reamed) for final assembly. Check end play as well. Make sure oil passages and oil feed holes in bushings are clear. Tapered screw holes may require a deeper counter sink, check with screw head before installation. May require some modification for proper fitment. *NOTE: Check oil passage (drilled hole) into bronze bushings, either on existing bushings or when replacing bushings. Generato holes for 32E 6 volt 2 brush generators are 1/4" on Pre-1957 models and 5/16" on 1958-1969 models. *NOTE: This is the Alcoa version.
*NOTE: Accepts 1/4" generator screws. Cam cover bushings must be checked and fitted (reamed) for final assembly. Check end play as well. Make sure oil passages and oil feed holes in bushings are clear. Tapered screw holes may require a deeper counter sink, check with screw head before installation. May require some modification for proper fitment. *NOTE: Check oil passage (drilled hole) into bronze bushings, either on existing bushings or when replacing bushings. Generato holes for 32E 6 volt 2 brush generators are 1/4" on Pre-1957 models and 5/16" on 1958-1969 models. *NOTE: This is the Alcoa version.
EL 1936-1947 FL 1941-1947 |
FITMENT DISCLOSURE:
This quick reference fitment information is provided to direct you to our catalog information
and the manufacturer's information. Consult manufacturer publication(s) and/or website(s) for
specific fitment and application information and other important information. This fitment
information is based upon the stock version of the motorcycle or unit referenced and any
accessory added or other modification could invalidate the quick reference information provided.
| UOM | 1 - EA |
|---|---|
| Manufacturer | V-Twin |
| Origin | Imported |
| Tech Note | *NOTE: Final reaming for fit should be completed with cover on the right side case, reamed from the left side. |
V-Twin 8-Finned Knucklehead Cam Cover Chrome - 10-1748
- Brand: V-Twin
- Product Code: 10-1748
- Availability: Out Of Stock
-
$297.22
Tags: Classic Pre-1984, Engine, Cam Cover, Cam Covers