Motorshop Factory Sample 4-Finned FL Cast Cam Cover
Manufacturer - Distributor - OEM Numbers
V-Twin Manufacturing Part Number: 10-2083
Motorshop Part Number:
OEM Numbers: 25216-58
Cast aluminum cam cover includes bushings and breather pipe. The cover has a stock natural finish and features a 4-fin design.
Cam cover bushings must be checked and fitted (reamed) for final assembly. Check end play as well. Make sure oil passages and oil feed holes in bushings are clear. Tapered screw holes may require a deeper counter sink, check with screw head before installation. Generator holes for 32E 6V 2 brush generators are 1/4" on Pre-1957 models and 5/16" on 1958-1969 models. Before installation, check the height of the cam bushing for interference with the distributor drive gear. Check oil passage (drilled hole) into bronze bushings, either on existing bushings or when replacing bushings. *NOTE: The oil hole in the cam bushing should be checked by the customer, may have to drill this hole. Factory sample is a brand new production part but may have imperfections in the finished surface. Check threaded and bearing holes for excess plating before installation. There are no physical defects, such as cracks or holes, there will be cosmetic imperfections only.
Cam cover bushings must be checked and fitted (reamed) for final assembly. Check end play as well. Make sure oil passages and oil feed holes in bushings are clear. Tapered screw holes may require a deeper counter sink, check with screw head before installation. Generator holes for 32E 6V 2 brush generators are 1/4" on Pre-1957 models and 5/16" on 1958-1969 models. Before installation, check the height of the cam bushing for interference with the distributor drive gear. Check oil passage (drilled hole) into bronze bushings, either on existing bushings or when replacing bushings. *NOTE: The oil hole in the cam bushing should be checked by the customer, may have to drill this hole. Factory sample is a brand new production part but may have imperfections in the finished surface. Check threaded and bearing holes for excess plating before installation. There are no physical defects, such as cracks or holes, there will be cosmetic imperfections only.
FLH 1954-1962 |
FITMENT DISCLOSURE:
This quick reference fitment information is provided to direct you to our catalog information
and the manufacturer's information. Consult manufacturer publication(s) and/or website(s) for
specific fitment and application information and other important information. This fitment
information is based upon the stock version of the motorcycle or unit referenced and any
accessory added or other modification could invalidate the quick reference information provided.
| OEM No. | 25216-58 |
|---|---|
| UOM | 1 - EA |
| Finish | Natural |
| Manufacturer | Motorshop |
| Origin | Imported |
| Tech Note | *NOTE: Final reaming for fit should be completed with cover on the right side case, reamed from the left side. *NOTE: Cover is taller than the stock type by .020" on the outer bushing lip. |
Motorshop 25216-58 Factory Sample 4-Finned FL Cast Cam Cover - 10-2083
- Brand: Motorshop
- Product Code: 10-2083
- Availability: Out Of Stock
-
$101.45
Tags: Classic Pre-1984, Engine, Cam Cover, Cam Covers