Cam cover for Big Twin models includes installed bushings and features a 4 fin design with an alloy finish.
Cam cover bushings must be checked and fitted (reamed) for final assembly. Check end play as well. Make sure oil passages and oil feed holes in bushings are clear. Tapered screw holes may require a deeper counter sink, check with screw head before installation. May require some modification for proper fitment. *NOTE: Check oil passage (drilled hole) into bronze bushings, either on existing bushings or when replacing bushings. Generator holes for 32E 6 volt 2 brush generators are 1/4" on Pre-1957 models and 5/16" on 1958-1969 models.
Cam cover bushings must be checked and fitted (reamed) for final assembly. Check end play as well. Make sure oil passages and oil feed holes in bushings are clear. Tapered screw holes may require a deeper counter sink, check with screw head before installation. May require some modification for proper fitment. *NOTE: Check oil passage (drilled hole) into bronze bushings, either on existing bushings or when replacing bushings. Generator holes for 32E 6 volt 2 brush generators are 1/4" on Pre-1957 models and 5/16" on 1958-1969 models.
FITS | FL 1954-1962 |
---|
UOM | 1 - EA |
---|---|
Finish | Natural |
Manufacturer | V-Twin |
Origin | Imported |
Manufacturer Part #:
V-Twin Manufacturing Part #: 10-1315
V-Twin Alloy 4 Fin Cam Cover 10-1315
- Brand: V-Twin
- Product Code: 10-1315
- Availability: Out Of Stock
-
$273.09
Tags: V-Twin, Classic Pre-1984, Engine, Cam Cover, Cam Cover