Bobbed 3.5 Gallon Gas Tank Set

Gas tank set accepts left side petcock with 3/8" NPT thread, and has a fuel capacity of 3.5 gallons. The right side of the tank has 1/8" NPT thread for fuel crossover tube. Tanks do not have emblem mounts.
Bobbed two piece gas tank set features handshift mounts. Check the tank for flaws and fit before painting. Do not grind or sand the seams or joints. Clean the inside of the tank. It is suggested to pressure test and use a tank sealer. We suggest using Kreem gas tank combo kit to clean, condition, and seal to help stop leaks and prevent corrosion. Check petcock opening, making sure the petcock can be easily installed. Petcock fitting should be masked or plugged during painting for easy installation of the petcock. All tanks or tank sets will require hand fitting to give correct alignment for dash and fuel line fitment. Dash will also have to be shimmed when installed, to achieve correct height. Tanks accepts cateye style dashes only. The lower bracket is a full circle around the petcock hole. *Note: UPS may consider this part as packaged "oversize" for shipment, as compared to the actual weight, which will result in higher shipping costs.

FITS:	EL 1936-1939

V-Twin Manufacturing Part #: 38-0909

UOM	1 - SET
Measurements	Top Length: 18-1/4" Bottom Length: 17-1/2" Rear Width: 2-1/2"
Manufacturer	V-Twin
Origin	Imported
Style	Bobbed
Tech Note	Suggested to use #41-0113 Kreem gas tank combo kit Suggested to use #49-0076 shift gate for 4-speed Suggested to use #49-0073 shift gate for 3-speed
Other Notes	Front Width: 4-3/4" Rear Height: 1-1/2" Front Height: 8"

V-Twin Part #: