Factory Sample 41mm Fork Slider Assembly Chrome

Factory sample stock length fork slider assembly with chrome lower legs hard chrome fork tubes and dampers installed. Assembly is for 11 inch single disc application.

Allows the use of 1984-1999 style 21 inch wheel caliper and brake from the original motorcycle. Sold as a set of two. Factory sample is a brand new production part but may have imperfections in the finished surface. Check threaded and bearing holes for excess plating before installation. There are no physical defects such as cracks or holes there will be cosmetic imperfections only. *NOTE: Die-cast sand cast and investment cast have inherent porosity as part of the manufacturing. The pits voids and marks will show up in the final finish but do not affect fitment or use on primary covers fork legs rocker box covers cam covers kicker or sprocket covers. *NOTE: Includes all internal components. Fork leg assemblies will requires disassembly to check or replace seals and to add oil for final assembly.

Measurements:

Overall Length: 33-5/8 inches
Top to Axle Hole: 32-3/4 inches

Tech Notes:

Drain assembly lube. We recommend 20 weight oil for average conditions. The amount of fork oil per leg is 10.2 ounces.

Basic Generalized Stock Fitment Chart:

1984 - 1999 FXST

Unit Of Measure: SET

Manufacturer Details:

OEM Cross Reference Part Numbers: