Factory Sample 41mm Fork Slider Assembly

Assembly includes chrome sliders with springs hard chrome fork tubes and components installed.

Sold as a set of two. Assembly is for single disc application. Requires approximately 8.5 oz of fork oil per leg. *NOTE: Axle hardware not included. Requires removal of chrome on lower leg for axle fitment. The fork mount and brake holes measure 2-3/4 inch center to center. Factory sample is a brand new pre-production parts but may have imperfections in the finished surface. Check threaded and bearing holes for excess plating before installation. There are no physical defects such as cracks or holes there will be cosmetic imperfections only. *NOTE: Die-cast sand cast and investment cast have inherent porosity as part of the manufacturing. The pits voids and marks will show up in the final finish but do not affect fitment or use on primary covers fork legs rocker box covers cam covers kicker or sprocket covers.

Measurements:

Tip to Tip: 32 inches

Tech Notes:

Suggested to use with #44-0084 Chrome Front Axle.
Drain assembly lube. We recommend 20 weight oil for average conditions.

Basic Generalized Stock Fitment Chart:

2000 - 2006 FLST

Unit Of Measure: SET

Manufacturer Details:

OEM Cross Reference Part Numbers: