S&S Cycle 475G Gear Drive Camshaft Kit for 2017-'19 M8 Models 330-0645
Features & Benefits
- The 475G is a 100 HP Bolt-in Cam (When coupled with intake and exhaust)
- Eliminates cam drive chain and tensioner
- Kits include all required bearings, o-rings, and hardware
- Gear drive cams provide improved valve timing accuracy
- Made in the USA
Suggested:
930-0123 Quickee Adjustable Pushrods with Cover Keepers for 2017-'19 M8 Models (Save labor and time! Eliminate the need to remove the rocker boxes and coolant lines)
330-0175 Premium High Performance Tappet Set Without HL2T Kit For 1999-'18 HD Big Twins, 2000-'19 HD Sportster and 2017-'19 M8 Models (Tappets should be replaced every time that the cam is replaced)
| Intake | Exhaust | Overlap | |||||||||||
| Cylinder | Open BTDC | Close ABDC | Dur | Center | Valve Lift | TDC Lift | Open BBDC | Close ATDC | Dur | Center | Valve Lift | TDC Lift | |
| Front | 6.2 | 27.2 | 213.5 | 100.5 | 0.475 | 0.107 | 55.5 | 28.5 | 263.9 | 103.5 | 0.475 | 0.208 | 34.7 |
| Rear | 2.2 | 31.2 | 213.5 | 104.5 | 0.475 | 0.093 | 52.2 | 20.2 | 252.5 | 106.0 | 0.475 | 0.170 | 22.4 |
Manufacturer: S&S Cycle
Part Number: 330-0645
Instructions Sheets:
Instructions Sheet (CLICK HERE)
S&S Cycle 475G Gear Drive Camshaft Kit for 2017-'19 M8 Models 330-0645
- Brand: S&S Cycle
- Product Code: 330-0645
- Availability: Special Order
-
$458.95