S&S Cycle Camshaft, Kit, Chain Drive, 590C, 2017-up M8 Models 330-0730
The 590C cam was designed as an all out Horsepower Cam for 124 and larger engines. Big lift lets your big mill breathe high into the RPM range!
FEATURES & BENEFITS
- S&S 590 Cam - Designed for massive horsepower in 124 and larger engines
- 590 cam powerband is weighted to top end performance, peaking past the redline of a stock motor.
- Includes all gaskets, bearings, and hardware required for installation
Required for installation:
- This cam requires Adjustable Pushrods and Heavy Duty Valve Springs. We recommend:
Suggested:
- 330-0718 Precision Tappet Set Without HL2T Kit For 1999-'17 HD Big Twins, 2000-'20 HD? Sportster?, and 2017-up M8 Models (Tappets should be replaced every time that the cam is replaced)
- 330-0655 Tappet Cuffs for M8 Models
S&S? Camshaft Specifications | |||||||||||
| Cam | Cylinder | Valve Timing | Valve Duration | Valve Lift | Lobe Center Line | Valve Lift @ TDC | |||||
| Intake | Exhaust | Intake | Exhaust | Intake | Exhaust | Intake | Exhaust | Intake | Exhaust | ||
| Open BTDC/ Close ABDC | Open BBDC/ Close ATDC | ||||||||||
| 590 | Front | 15.6/43.7 | 64.8/21.2 | 239.4 | 266.1 | 0.59 | 0.59 | 104.1 | 111.7 | 0.165 | 0.186 |
| Rear | 20.2/53.6 | 62.7/15.7 | 253.9 | 258.4 | 0.59 | 0.59 | 106.7 | 113.5 | 0.186 | 0.158 | |
Instructions:
Instruction Sheet
S&S Cycle Camshaft, Kit, Chain Drive, 590C, 2017-up M8 Models 330-0730
- Brand: S&S Cycle
- Product Code: 330-0730
- Availability: Special Order
-
$234.95
Tags: S&S Cycle, Engine Components