TWIN TUNER EFI CONTROLLERS FOR BIG TWIN

• Allows you to easily adjust your fuel injection to match the requirements of performance parts including camshafts, free flowing exhausts and low restriction air filters
• Gives you the ability to add or subract fuel
• Installation only takes 10 to 15 minutes - no slicing, cutting, crimping or bulky inter connections. All access is at the Delphi ECM
• You can use the mode and up/down push button switches to make fuel trim adjustments in the RPM and throttle position ranges required by most applications
• The fuel trim value is displayed on a bright readable LED display
• Includes an advanced mode where you can use the optional USB interface and PC link tuner software to make precise fuel adjustments
• The PC link tuner software uses the same RPM rows and throttle position columns as the Dynojet Power Commander
• Front and rear cylinders can be independently adjusted
• Use in combination with Twin Scan II found in this section for more precise tuning
• You will not need a Dyno for precision tuning, just install the Twin Scan II and ride the bike
• You can then copy the air/fuel ratio corrections calculated by the Twin Scan II into the PC link tuner software

Mid-USA Part Number: 82744

UOM: EA