Chain Driven Cam

Features

• Allow you to upgrade your 99-06 Twin Cam (except 06 Dyna Glide) to the newer roller-style cam chains and replaces the spring tension cam chain adjusters with the later-style hydraulic adjusters for longer life
• Cam grinds listed are designed to be used with stock lifters; they require the installation of a 07-17 cam plate, oil pump, cam sprockets and chains, and both hydraulic chain adjusters (these parts are not included and must be purchased separately)
• A list of required components is supplied with each set of cams
• Performance should be similar to earlier bikes with the same cam grinds
• Made in the U.S.A.
• 99-06 Twin Cam motors (except 06 Dyna Glide) cannot use the 07-17 cams, as the bearing journal on the earlier motors is .875" in diameter and the 07-17 cams are 1.000" in diameter. The "N" series of cams feature the .875" bearing journal, yet still accept the new style cam support plate
• 99-01 model motors must use the Andrews rear cam sprocket Drag part #0925-0147. 2002-2006 models must use the stock rear cam sprocket, OEM #25728-06
• Installer must check coil bind, valve-to-valve clearance and valve-to-piston clearance

Specs

• Product Name: Cam Kit
• Type: Chain
• Application: Exhaust / Intake
• Grind: 37 Series
• Intake Lift at TDC: 0,174"
• Intake Open: 18 Degree
• Intake Lobe Centerline: 100 Degree
• Intake Close: 48 Degree
• Intake Lift: 0,510"
• Intake Duration: 240 Degree
• Exhaust Lift: 0,510"
• Exhaust Duration: 236 Degree
• Exhaust Lift at TDC: 0,148"
• Exhaust Open: 46 Degree
• Exhaust Lobe Centerline: 106 Degree
• Exhaust Close: 14 Degree
• Features: Can be used with stock springs and tappets.
• Units: Pair
• Riding Style: Street

Fitments