FEULING OIL PUMP CORP. 472 Cam - Chain Drive - Race Series - Oil Cooled - M8

Manfactuer Part #: 7261

Manufactuer Non-Punctuated Part #: 7261

Drag Specialties Part #: 0925-1330

Drag Specialties Non-Punctuated Part #: 9251330

Features

• Feuling complete camchest kits include all necessary components from top to bottom of the camchest conveniently packaged under one part
• These combination kits not only ensure each individual part is designed to work and function together, but to do so in total harmony
• These camchest kits take the guesswork out of the ordering process and provide the engine builder maximum reliability, peak performance and the coolest engine/ oil temperatures obtainable
• Complete Camchest Kits include: Feuling High Volume oil pump, High Flow camplate, 472 Reaper Series camshafts, hydraulic roller lifters, fixed length pushrods, Timken/ Koyo cam bearings, rocker arm studs/ nuts, gaskets, O-rings, ARP cam/ crank fasteners, washers, moly paste and Loctite
• Race Series kits include a Race Series oiling system (billet 7075 oil pump, Race Series lifters, High Flow billet 7075 aluminum camplate
• Billet 7075 aluminum oil pump, which is 50% harder and stronger than the factory pump, holding tighter tolerances under temperature, deeper scavenge kidneys over Fueling HP+ oil pump
• Deeper scavenge kidney ports over the HP+ series for even more scavenge flow volume
• Race Series hydraulic lifters have a full .200" of total travel designed with a slower bleed-down rate to handle heavy valve spring pressures, increase engine rpm before valve float and feature increased roller clearance for steep ramped camshafts and clearance for the M-Eight front exhaust camshaft lobe flange
• 30% more pressure gear volume over stock for M-Eight Twin-Cooled motors
• 53% more scavenge gear volume over stock for M-Eight Twin-Cooled motors
• 27% more pressure and scavenge gear volume over stock for M-Eight Oil-Cooled motors
• 2% more scavenge volume with port sizing, matched passages and holes to the engine case for M-Eight Twin-Cooled motors and M-Eight Oil-Cooled motors
• 68% more oil volume to the crankshaft and connecting rod bearing for M-Eight Twin-Cooled motors and M-Eight Oil-Cooled motors
• 15-25 degree cooler engine temperatures for M-Eight Twin-Cooled motors and M-Eight Oil-Cooled motors
• 15-30 degree cooler oil temperatures for M-Eight Twin-Cooled motors and M-Eight Oil-Cooled motors
• 10-30 more psi of oil pressure for M-Eight Twin-Cooled motors and M-Eight Oil-Cooled motors
• Increase oil pressure, scavenge volume and engine oil flow
• Quieter and smoother engine operation
• Reduces wet sumping, blowby and oily air cleaners
• Magnets in oil pump to help protect gears and pressure relief valve
• Test results show 2 hp gain and 2 ft/lbs of TQ gain to the rear wheel on M-Eight
• Feuling test results show a 50% reduction of engine sump oil level
• Made in the U.S.A

Specs

Part Notices

• WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov

Emissions Notice

WARNING
DISCLAIMER: Not legal for sale or use in california on any pollution controlled motor vehicles. Click here for important emission definitions and regulatory compliance and warranty information.

UPC CODE: