Cam/Pinion
Product Compare (0)
This Sifton cam bearing puller tool removes the inner cam bearing, Torrington type without splitting..
$79.33
Cam bearing remover tool allows the removal of needle bearings while keeping the needles from fallin..
$83.95
The Jims cam bushing drill jig allows the installation and drilling of a dowel pin to factory locati..
$82.77
The cam bushing drill jig allows the installation and drilling of a dowel pin to factory location. S..
$82.00
JIMS 1-3-4 cam bushing drill jig allows the installation and drilling of a dowel pin to factory loca..
$82.77
Cam chain unloader tool will hold the tension of the primary cam chain on the TC-88 model engine. In..
$83.69
Cam cover puller toolVT No: 16-0839 Cam cover puller tool Fits:FL 1970-1984FX 1970-1984FXR 1982-1994..
$23.62
Cam gear check pin measures .105.VT No: 16-1749 Cam gear check pin measures .105. Sold as a pair Fit..
$26.16
Cam gear check pin measures .108.VT No: 16-1750 Cam gear check pin measures .108. Sold as a pair Fit..
$25.33
Crane cam installation tool comes with easy instructions for installing adjustable pushrods without ..
$45.33
Cam shaft needle bearing tool installs needle bearings without damage.VT No: 16-0126 OEM No: 97272-6..
$23.55
Cam shaft needle bearing tool installs needle bearings without damage.VT No: 16-0127 OEM No: 97273-6..
$35.75
Early wrench tool with hex 9/16" X 1/2VT No: 16-0808 OEM No: 11804X Early wrench tool with hex 9/16"..
$19.94
Eastern cam bushing reaming tool is used to ream the cam bushing in the crankcase.VT No: 16-1802 OEM..
$264.21
Gear shaft nut socket wrench tool.VT No: 16-0141 OEM No: 94555-55A Gear shaft nut socket wrench tool..
$43.60
The cam locking tool allows the removal and torquing of cam sprocket bolts by locking camshaft and c..
$120.22
Jims breather ream tool repairs damaged breather gear holes.VT No: 16-0695 Jims breather ream tool r..
$1,069.70
Jims bushing remover/installer tool will help remove and install bushings in cam support plate on TC..
$167.04
Jims cam bearing and bushing alignment tool checks the alignment of cam bearing to cam cover bushing..
$132.28
Jims cam bearing installer tool presses the inner cam bearings smoothly into the right case with the..
$239.79
The Jims cam bearing puller tool is used to remove the bearing from the crankshaft and is designed t..
$332.84
Jims cam cover bushing remover tool will remove the cam cover bushing.VT No: 16-0669 Jims cam cover ..
$269.93
This alignment tool is designed to index the cam gears position while removing on installing the cam..
$426.91
The cam gear remover tool is used to remove the cam gear from the camshaft.VT No: 16-1283 The cam ge..
$112.23
Jims cam locking wedge tool will lock the gear teeth on the TC-88 model engine. Instructions include..
$89.77
Jims cam shaft remover and installer tool allows removal and installation of cams in the TC-88 model..
$284.93
Jims pin gear lock tool is used when applying torque to the pinion nut.VT No: 16-0659 Jims pin gear ..
$219.14
Jims pinion gear nut socket wrench tool is to remove or secure the pinion gear nut to pinion gear sh..
$80.85
Jims brand pinion gear puller tool is used to remove and install pinion gear.VT No: 16-0162 OEM No: ..
$371.28
Jims tappet adjuster hand tool verifies proper adjustment on most hydraulic tappets for Evo and Twin..
$51.58
Jims tappet position holding tool for Twin Cam and Sportster engines. This tool allows the tappets a..
$95.00
Jims tappet screw plug tool is used to remove tappet oil filter screen plug without removing exhaust..
$56.25
This adapter is for the Jims tappet pump and test tool for use on Evolution style tappets.VT No: 16-..
$92.20
The Jims inner cam bearing remover replaces the inner bearing easily without damage to crankcases an..
$259.71
Sifton needle bearing puller tool removes the inner cam bearing without splitting the cases while pr..
$83.95
Needle bushing tool positions pinion bushing in cam cover.VT No: 16-0711 Needle bushing tool positio..
$15.86
Pinion bearing race removal tool is used to remove and install the outer race on 1958 and later mode..
$23.51
The Jims pinion bushing jig tool allows the installation and drilling of a dowel pin to factory loca..
$82.77
The cam and pinion bushing drill jig tool allows the installation and drilling of a dowel pin to fac..
$82.00
This pinion bushing puller tool is used to remove the pinion bushing from the cam cover.VT No: 16-18..
$251.64
Pinion gear puller tool kit is used to remove and install the pinion gear.VT No: 16-0129 OEM No: 968..
$89.14
Pinion puller tool collar setVT No: 16-0406 Pinion puller tool collar set Fits:Replacement applicati..
$39.87
The bushing reaming tool fits pinion bushing in cam cover.VT No: 16-0962 OEM No: 94812-89 The bushin..
$189.67
Pinion shaft race installer toolVT No: 16-0965 OEM No: 97080-77A Pinion shaft race installer tool Fi..
$15.86
Sifton cam cover bushing remover tool will remove the cam cover bushing.VT No: 16-1043 Sifton cam co..
$81.87
Tool is used for installation and removal of the pinion gear.VT No: 16-1060 OEM No: 96830-51 Tool is..
$77.90
The tappet guide alignment screws are 0-150 PSI and 1/4" wide x 24 threads for after market crankcas..
$11.86
Use to align tappet guide to engine case and also aligns oil pump to cam plate.VT No: 16-0998 OEM No..
$26.02
Tappet guide puller tool.VT No: 16-0157 OEM No: 95724-57 Tappet guide puller tool. Fits:XL 1957-1985..
$35.47
This tool is wide slot type to remove stock slotted plug without removing exhaust pipes.VT No: 16-08..
$11.80
TC-88 chain shoe tool is used to remove and replace the spring loaded cam chain tensioners.VT No: 16..
$144.54
This inner cam bearing remover replaces the inner bearing easily without damage to crankcases and al..
$79.14
This four piece tool safely installs the inner cam bearings to the proper depth in the case without ..
$78.65
This tool is used to remove the 2-1/4" hex nut from the main drive gear which secures the rear drive..
$82.65
Gear Alignment ToolOil pump/crankshaft gear alignment tool is used to align the oil pump gear flats ..
$58.23
Stop/Piston TDC ToolTool is used for engine timing by locating the piston at TDC (Top Dead Center). ..
$39.89
Showing 1 to 56 of 56 (1 Pages)